Mingtai Aluminum: Four Considerations for Pharmaceutical Foil Production Process

【China Aluminum Industry Network】 In our daily life, the application of medicinal aluminum foil is very extensive and mature. The main uses of pharmaceutical foils include blister packs for pharmaceutical capsules and tablets, and pouch packs for powder granules and liquids. Because of its direct contact with food products, the state has very strict requirements on the appearance and performance of pharmaceutical foils.

The common pharmaceutical foils on the market have two alloy states, namely 8011 aluminum foil and 8021 aluminum foil, in which the 8011 alloy generally has a thickness of 0.05 mm or less, and the 8021 alloy has a thickness of more than 0.05 mm. In general, the main production process is: billet inspection - open billet - open in the sub-rolling - roll-rolling - rolled products - slitting - furnace annealing - finished product packaging. The surface of medical aluminum foil requires no oil, no bright crystal, no black lines, no pinholes, no yellow spots, no lotus leaf, etc. In the production process, the control of the surface and performance is mainly several points:

First, we must first control the quality from the source and strictly inspect the blank;

Secondly, in the rolling process, the surface quality is controlled through the cleaning and roughness control of the rolls, the selection of the rolling oil, the reduction of the viscosity of the rolling oil, and the control of the operating speed of the machine.

Third, again, in the process of cutting, it is necessary to ensure that the edges of aluminum coils are neatly trimmed during the slitting process, and quality problems such as lotus leaf edges cannot occur;

Fourth, later in the annealing process, according to the performance requirements of the drug foil to control the annealing time and annealing temperature, to ensure clean degreasing.

With the development of the pharmaceutical industry, pharmaceutical aluminum foils have improved moisture resistance, barrier properties, chemical resistance, chemical stability, and hygienic application. The appearance and quality requirements are also increasing. The prospects are very broad.

Hanmac is Manufacturer, Supplier & Exporter of Alloy Steel Pipe Fitting, which includ Alloy Elbow , Alloy Tee

Alloy Reducer, Alloy Cap .and that Alloy Elbow is widely use in pressure piping and pressure vessel service at low temperatures. 

Alloy Steel Elbow are shall be supplied in normal,normalizing, annealing or quenching tempering condition. 

Pipe Fitting Elbow is mainly used for connecting pipe fitting in pipe installation, also for connecting pipe bend, Connect two of the same nominal diameter tube, and make the line do turn 90 ° or other angles. 

Welcome to visit our Pipe Fitting Elbow

Alloy Steel Pipe Fitting

Pipe Fitting Elbow

Products Name Alloy Elbow,Alloy Steel Pipe Fitting,Alloy Steel Elbow,Pipe Fittings  Elbow
Size Seamless (SMLS) fittings: 1/2"-24", DN15-DN600.
Welded fittings (seam) 26"-100", DN650-DN2500.
We also accept customized type

SCH10,SCH20,SCH30, SCH STD, SCH40, SCH60, SCHXS, SCH80, SCH100, SCH120, SCH140,


Connection Type Butt Welded 
HS CODE 7307930000
Standard ASME, ANSI B16.9
JIS B2311/2312/2313
GOST 17375
we can also produce according to drawing and standards provided by customers.
Material ASTM A234 WP11; WP12; WP22;WP5;WP9;WP91;WP911; ASTM A420 WPL6
16Mn; Q345B
Surface Black painting or Customized painting
Applications Petroleum, chemical, machinery, boiler, electric power, shipbuilding, construction, etc
Main Market

Turkey, Italy, France, Spain, South Africa, Moroco, Dubai, Iran, Syria, Singapore, Vietnam, Austria,

 USA, Canada, Mexico, Korea, Thailand, India, Bulgaria, Russia and so on

Certificate ISO9001-2008, 
Delivery time 30days after receipt of advanced payment or original LC ,Common size large quantity in stock  
Payment term T/T, L/C
Inspection Factory In-House Check or The Third Party Inspection
Packaging Plywood Pallets/ Wooden Case Or As Per customer's request
MOQ No Limit
Technics Hot Forming
Origin China
Sample Sample can be free, but customer have to pay transport cost
Alloy Elbow

Alloy Steel Pipe Fitting

Alloy Steel Elbow

Pipe Fitting Elbow

Alloy Steel Pipe Fitting

Alloy Steel Elbow

Alloy Elbow

Alloy Elbow,Alloy Steel Pipe Fitting,Alloy Steel Elbow,Pipe Fittings Elbow

HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com